Home / What it costs
What plumbing costs in Greensboro
Tap to call(336) 271-7669Honest price ranges for the jobs people call about most, so you know roughly what to expect before a plumber gives you a real number.
Checked October 2026. Ranges are estimates, not quotes.
Inside the Galyon Depot, downtown GreensboroWhat each job usually runs
Read this first: these are national ranges from published HomeAdvisor cost guides. We haven't collected enough Greensboro quotes yet to give local numbers, so we're not pretending to. Your price depends on the job, the house and the plumber. Always ask for the price before work starts.
Want a real number? Call and describe the job. The plumber can give you a price or a range before booking.
Get a price: (336) 271-7669| Job | Typical range | Source |
|---|---|---|
| The visit and small jobs | ||
| Plumber's hourly rateFull range; most land around $70 to $120. Some charge a flat trip fee insteadSource: HomeAdvisor, 2026 | $45 to $200/hr | HomeAdvisor, 2026 |
| Service call or trip feeOften covers the first hourSource: HomeAdvisor, 2026 | $50 to $300 | HomeAdvisor, 2026 |
| Clogged drain (one drain)Snaking a sink, tub or toilet lineSource: HomeAdvisor, 2026; average about $246 | $147 to $352 | HomeAdvisor, 2026; average about $246 |
| Toilet repairRunning, leaking or weak flushSource: HomeAdvisor, 2026; average about $271 | $150 to $391 | HomeAdvisor, 2026; average about $271 |
| Drains and sewer lines | ||
| Hydro jetting a drain lineHigh-pressure water for grease and rootsSource: HomeAdvisor, 2026; average about $475 | $350 to $600 | HomeAdvisor, 2026; average about $475 |
| Main sewer line clogFrom a quick snake to camera plus cleaningSource: HomeAdvisor, 2026; average about $376 | $187 to $569 | HomeAdvisor, 2026; average about $376 |
| New sewer lineDepends on length and diggingSource: HomeAdvisor, 2026; average about $3,319 | $1,388 to $5,323 | HomeAdvisor, 2026; average about $3,319 |
| Leaks and water heaters | ||
| Burst pipe repairDepends where the pipe isSource: HomeAdvisor, 2026; average about $500 | $200 to $3,000 | HomeAdvisor, 2026; average about $500 |
| Water heater repairTank type: element, thermostat, valveSource: HomeAdvisor, 2026 | $100 to $500 | HomeAdvisor, 2026 |
| Water heater replacement, tankInstalledSource: HomeAdvisor, 2026; average about $1,348 | $882 to $1,826 | HomeAdvisor, 2026; average about $1,348 |
| Tankless water heater, installedGas units sit at the top of the rangeSource: HomeAdvisor, 2026 | $1,400 to $3,900 | HomeAdvisor, 2026 |
| When you call | ||
| Nights, weekends, holidaysAdded on top of the job itselfSource: HomeAdvisor, 2026 | +$100 to $300 | HomeAdvisor, 2026 |
Source: HomeAdvisor's national cost guides, linked in each row. Where a guide gave an average, it's shown. None of these are Greensboro quotes.
What pushes a Greensboro price up or down
We're a referral service, not a plumber, so we don't set prices. These ranges come from published national guides and are updated when we check them. If a range here is wrong for Greensboro, we'd rather fix it than keep it.
Older Greensboro houses
About one in five Greensboro homes was built before 1960, by census-based estimates. Those houses, in neighborhoods like Fisher Park, Westerwood and Lindley Park, can have galvanized steel supply pipe or cast-iron drains. Old pipe can turn a simple swap into a bigger repair once the plumber sees what's behind the wall.
What's under the house
Work in a tight crawlspace takes longer than work in an open basement. A leak under a concrete slab costs the most to reach. Tell the plumber what's under your house when you call.
Tree roots and old sewer laterals
Neighborhoods with big old trees, like Irving Park and Fisher Park, can see more root trouble in older clay and cast-iron sewer pipe. A camera inspection ($200 to $1,300 per HomeAdvisor) tells you whether you're paying for a cleaning or a dig.
Time of day
The same clog costs more at 10 at night or on a Sunday. If water is shut off and nothing is getting damaged, waiting for regular hours can save you the after-hours fee.
North Carolina permits
North Carolina law requires a permit to install, extend or generally repair a plumbing system, with a narrow exception for a like-for-like water heater swap. In Greensboro that's through Engineering & Inspections; for High Point and other towns, ask your plumber which office covers your address. A licensed plumber normally pulls it and includes the fee in the price.
Water heater on this list?
Repair or replace is the most common money question we hear. Our water heater guide walks through it by age and cost.
Comparing plumbers' quotes
- Describe the problem clearly and send photos if the plumber asks.
- Ask whether they charge a trip fee, by the hour, or a flat price for the job.
- For anything over a few hundred dollars, ask for the price in writing before work starts.
- Get the company name and license number, and check it at nclicensing.org.
- For a big job like a sewer line, a second opinion is normal and worth the wait if nothing is leaking.
Who's behind this site, and who pays
We're a referral service. Calls connect you with independent local plumbers. We don't do the work ourselves, and prices are set by the plumber you talk to.
Plumbing businesses pay a fee to receive calls, which is how this site is paid for. You only pay the plumber, and only for work you agree to.
The plumbers who answer handle their own licensing, insurance and work. Calls may be recorded for quality by the company that answers.
Checked October 2026.
Plumbing trouble in Greensboro or High Point? One call.
(336) 271-7669